The distinguishing feature of Vetter Mini Lifting Bags 8.0 bar (116 psi) is the noiseless, jolt-free, and smooth lifting of the heaviest loads. They lift, push, press, prise and split, even on sloping surfaces. The surface profile improves grip on slippery ground such as grass, sand etc.

They are produced in two versions. Both versions have a multi-layer construction which covers each side of the bag. This is either steelcord or aramide reinforcement.

The advantage of aramide reinforcement over steelcord reinforcement is its low weight (refer to the technical data).

On the other hand, steelcord reinforcement has a greater pragmatical value.

Both versions have antistatic and self-
extinguishing characteristics and

are therefore permitted for the mining industry.

Inflation of the Mini Lifting Bags is normally carried out with compressed air (option water).

The accessories required for inflation can be seen on the page "System accessories 8.0 bar (116 psi)" and can be individually compiled.

In every case, an inflation hose and a controller, or a combination of both, belong to the inflation installation. The controllers are equipped with a manometer and a safety valve and therefore avoid unintentional over-inflation of the Mini Lifting Bags.

The remaining accessories can be selected from the lower part, depending on the type of air source required or which exists.